1. Power On
Press and hold the power button for 2 seconds to turn on the HyperMate Pro device. Select your preferred language.
Check the battery icon in the top-right corner of the screen. If the battery level is below 50%, charge the device using a 5V-compatible charger before proceeding.
2. Create Wallet
You will see two options: “Create Wallet” and “Recover Wallet”. Use the up/down buttons to select “Create Wallet”, then press “OK” to confirm.
3. Set Up PIN Code
Create a PIN code for your wallet.
Important:
HyperMate Pro does not store your PIN. Use another method to memorize it.
The PIN must be 5 to 8 digits long, using only numbers 1-5.
Use the up/down buttons to adjust each digit and press “OK” to confirm.
Press the power button to go back.
Warning: After 10 consecutive incorrect PIN attempts, the device will automatically reset and erase all private keys and associated data.
4. Generate/Back Up Recovery Phrase
Choose the number of words for your recovery phrase (e.g., 12, 18, or 24). Use the up/down buttons to navigate and the OK button to confirm each word.
Critical reminders:
Write down the recovery phrase in order on paper, in a private and secure location.
Store the paper safely and never share it.
Never save the phrase on internet-connected devices (e.g., laptops, phones).
⚠️ Warning: Anyone with your recovery phrase can restore your wallet and access your assets without the PIN.
5. Verify Recovery Phrase
HyperMate Pro will help confirm your backup is correct:
You will be asked to select 5 random words from your 12-word recovery phrase.
If verification fails, the device will force you to re-record the recovery phrase.
6. Wallet Creation Complete
HyperMate Pro will generate wallet addresses from your recovery phrase. This process takes ~2 minutes. Once done, the device will notify you that your wallet is ready.
Note: Keep your recovery phrase and PIN secure at all times.